PDA

View Full Version : Decals for Switch Panels

12-10-2006, 01:03 AM
It took a while but I finally have decals available for the switch panels!
http://www.offroadcontrols.com/images/panels/P1010036.JPG

This one is perfect for TJ's.
http://www.offroadcontrols.com/images/panels/P1010023.JPG

You can view the entire list of available decals here:
http://www.offroadcontrols.com/orcd.htm

All in-cab winch control panels (http://www.offroadcontrols.com/orcwcsp.htm)include a set of decals. All other decals can be purchased separately for .20 each!!!

I have a WINCH (http://www.offroadcontrols.com/images/Decals/P1010082.JPG) decal available for the toggle switch cover and plan to have an IGNITION and BATTERY made soon. If you can think of any other decals you would like to see, please let me know. :D
JeepinSoldier
12-13-2006, 05:25 PM
I was just talking with 02 TJ about a switch panel for my Jeep, wondering if I could get it labeled!

Looking for a 2 switch panel labeled tis way:

Top center- AUX LIGHTS.

Under the switches-Left - FRONT, Right - REAR.

Trying to decide if I want the ones with the lights showing that they are on or not.
zman
12-14-2006, 06:19 AM
I was just talking with 02 TJ about a switch panel for my Jeep, wondering if I could get it labeled!

Looking for a 2 switch panel labeled tis way:

Top center- AUX LIGHTS.

Under the switches-Left - FRONT, Right - REAR.

Trying to decide if I want the ones with the lights showing that they are on or not.

I dont have those decals available today but I am in the process of running another batch of labels.

I do have an OFF RD LIGHTS, and LIGHTS decal but I can also make an AUX LIGHT. Decal list. (http://www.offroadcontrols.com/orcd.htm)
JeepinSoldier
12-18-2006, 04:18 AM
Ok, I am prob going to order a two switch panel. I posted becouse of what you had posted here. I really would also like the FRONT and REAR labels.

If you can think of any other decals you would like to see, please let me know. :D
zman
12-18-2006, 04:40 AM
Ok, I am prob going to order a two switch panel. I posted becouse of what you had posted here. I really would also like the FRONT and REAR labels.

If you can think of any other decals you would like to see, please let me know. :D

Not a problem, I should have new decals by mid to late next week.
JeepinSoldier
12-18-2006, 04:45 AM
Not a problem, I should have new decals by mid to late next week.

Cool!, How hard is it to install that winch controller? What else is necessary for installation?
zman
12-19-2006, 05:57 PM
Which panel are you looking at? Formed panels (90 degree bend) are the easiest to install as it only takes a couple to screws to mount to the dash. If you're looking at the small panel (as shown above) to mount over the ash tray blank, it will take cutting into the dash but it's not diffucult at all. I'll take a snap shot of the panels mounted in my TJ.

Other than a switch panel, you will need wiring. We're hoping to be setup with wiring kits within the next few weeks but you can get everything you need from your local hardware store too.
JeepinSoldier
12-19-2006, 09:58 PM
I know I want a two switch panel for the aux lights.

I dont like the pigtail switch that ARB included in the light set. I want my Jeep to look as close to oem as possible, so Ill mount a labeled two switch panel over a cutout in the center console. I also want the switch covers. Debating if I want the indicator lights or not. Measuring my available space on the console will prob make up my mind for me. I still have to buy the rear lights and I can get the wiring and relay for them later, unless you can supply that stuff as well.

I was looking at the winch controller that mounted in the ash tray blank. Debating on if I want a winch controller there or a temp guage for the auto trans.
Stowe63
12-20-2006, 01:48 PM
If I give you a list can you print them out? Im the switch king.... I think I have 20 switches... which I dont have them all used up yet... but its my goal.
zman
12-20-2006, 04:19 PM
I know I want a two switch panel for the aux lights.

I dont like the pigtail switch that ARB included in the light set. I want my Jeep to look as close to oem as possible, so Ill mount a labeled two switch panel over a cutout in the center console. I also want the switch covers. Debating if I want the indicator lights or not. Measuring my available space on the console will prob make up my mind for me. I still have to buy the rear lights and I can get the wiring and relay for them later, unless you can supply that stuff as well.

I was looking at the winch controller that mounted in the ash tray blank. Debating on if I want a winch controller there or a temp guage for the auto trans.

I'll send you cutout dimensions for both two switch panels (with & without indicators). A 2" gauge would probably fit in the ash tray blank but unless you have a Dremel and steady hand, it might be tough to cut out the circle.

It will be a few weeks before I stock wiring, relays, and terminals.
zman
12-20-2006, 04:25 PM
If I give you a list can you print them out? Im the switch king.... I think I have 20 switches... which I dont have them all used up yet... but its my goal.

Send me the list and I'll check it against what I already have. If it's a decal that can be used by many, I can add it to the latest template. Otherwise you're looking at $20 - $25 for an 8.5 x 11 sheet full of custom decals.

Please send me you list ASAP. You can email it directly to sales@offroadcontrols.com or PM me here.

Thanks.