Wrenching party this Sunday the 30th at Mike's house

[H2_RECOVERY]

Here is the list.
4:88 gears front and rear
Front Axle seals

The date for the wrenching party has changed from Saturday, July 29th to Sunday July 30th. The start time will remain the same, 10:00 am. We look forward to you'll joining us then.

[lostone]

I can do the tie rod.......;)

[kitesurferinva]

I can do the tie rod.......;)

haha - you say that now..

[Pacifier]

I'm there if we can also install my 4.88's.... :)

[Thump03]

I'm there if we can also install my 4.88's.... :)

can I have your 4.11's :lol: lol

[Pacifier]

I'm there if we can also install my 4.88's.... :)

can I have your 4.11's :lol: lol

Unless you have Danna 44's, they won't do you any good. By the way, Gonzo got dibbs on them.

[Thump03]

haha I'm just kidding. I do have a D44 in the rear though :o

[Pacifier]

How did this turn out?

[Thump03]

I dunno if you mean me, but I have always had a D44 in the rear. (Heavy Duty Axle Package :D)

[lostone]

How did this turn out?

Ummmm. we will let you know next weekend..... :roll:

[Thump03]

I dunno if you mean me, but I have always had a D44 in the rear. (Heavy Duty Axle Package :D)

oops thought you meant me haha. :lol:

[Pacifier]

I'll be there with my gears ready to go. :)

[Stowe63]

I will need 4.88's in stalled here in a couple of weeks... :D In the front only though. :P

[kitesurferinva]

So my sister just called me and gave me the friendly reminder that my neices bday is this saturday (in NJ) and that I had promised her I'd be there. Guess IM stuck waiting a bit longer again, sorry guys for the trouble, I promise I'll beg for help again soon.. :(

[Pacifier]

In that case, we can do Diego's......Are we still on for Saturday? :)

[lostone]

I just remembered that there a big boating party going on at Tims II on the river.....I will more then likly be there.

[H2_RECOVERY]

Sure Diego's gears instead!! Who's in?

[DirtyBlon]

I'm in if I can track down a pair of control arms!

Also Mike...do you still have that front 386 set-up?

I guess I also should have my brakes checked while I am there :-)

[H2_RECOVERY]

do you mean 3:73? I do but you will need carries for them.

[fryed_1]

can we do my clutch/TOB, 3link, front gears, rear locker, shackles and finish the piping for my onboard air too?

[DirtyBlon]

do you mean 3:73? I do but you will need carries for them.

UH....DUNNO...I thought there were 3:73's in there now.....but what do I know.

[Pacifier]

What time shall we start 9:00 am?

[Thump03]

Denise I have a set of Skyjacker control arms, I dunno if they'll fit or if you want to use em. Came off my 4" lift (I replaced them with rustsys).

[Thump03]

oh and I'm in, but I wont be there probably till like 10ish, 9 is too early when your waking up at 6:30am everyday that week.

[DirtyBlon]

Denise I have a set of Skyjacker control arms, I dunno if they'll fit or if you want to use em. Came off my 4" lift (I replaced them with rustsys).

Does anyone know the answer to this? I am running with a 3 1/2" RE lift now.

[Thump03]

These came off the lower rear, so I know they will work for the rear I think they may work for the front?

[H2_RECOVERY]

The control arms will work. tool time starts at 10:00 am and you have 3:07 Denise

[Thump03]

Well I'm out, I have to do my drivers improvement course for my speeding ticket all saturday 8O Denise I'll bring the arms to the M&G.

[Pacifier]

Well I'm out, I have to do my drivers improvement course for my speeding ticket all saturday 8O Denise I'll bring the arms to the M&G.


How do you get a ticket in a Jeep...... 8O

[Thump03]

Wasnt the Jeep...Infiniti G35

[Pacifier]

Wasnt the Jeep...Infiniti G35

Not a beemer...never mind. LOL

[Thump03]

What? LOL

[Pacifier]

:arrow: This posting has been modified, please feel free to go back to the first post and read the updates.

[jackedjeep]

Hey guys Denise told me about the wrenching party, Ive got a long arm upgrade kit for a tj that has a triangulated four link rear, and she told me you guys might be able to help me, if its ok with Mike or whoevers leading this can I come?

[Thump03]

Ohhh nice changed to Sunday! I'm in!

[02tj]

have fun guys and gals. Ill be in Bama!

[H2_RECOVERY]

Rick that picture is so wrong in many ways!!

[Thump03]

I look like a bad a$$ haha. Oh and I'm out for tomorrow, the geniuses at the driving school re-schedualed it for tomorrow and didnt tell anyone. I WOKE UP AT 7 ON A SATURDAY FOR NUTHIN! 8O

[H2_RECOVERY]

Where are you?

[Thump03]

THATS ME in da Picture! :D lol

[Pacifier]

Mike,

I'm on my way..... see ya in a few minutes.

[Stowe63]

THATS ME in da Picture! :D lol


hahhaha.... I was trying to figure why he had that pic up there... I kept on saying "thats not his wife, I wonder who she is". HAHA... Sorry.

[Thump03]

I wonder who she is". HAHA... Sorry.

ouch 8O ..LOL

[H2_RECOVERY]

Wrenching party was a success and Diego's Rig now has 4:88s Denise got a new head unit and XM radio and a belly skid, She also has here new rear bumper 90% complete

Diego will post pics soon

Thanks for everyone coming out!!

[Thump03]

How did my old Control Arms work out?

[H2_RECOVERY]

not enough time to install them. It was pretty hot today!

[Pacifier]

Wrenching party was a success and Diego's Rig now has 4:88s Denise got a new head unit and XM radio and a belly skid, She also has here new rear bumper 90% complete

Diego will post pics soon

Thanks for everyone coming out!!

Mike forgot to mention the front axle seals and control arm skids.

Here are a couple of shots from today.

Empty pumpkin.....
http://i46.photobucket.com/albums/f108/irkermit/IMG_0523.jpg

Mike at work
http://i46.photobucket.com/albums/f108/irkermit/IMG_0522.jpg

Diego posing :)
http://i46.photobucket.com/albums/f108/irkermit/IMG_0521.jpg

[Pacifier]

It's almost a week since we installed the new gears in my Jeep, and all I can say is that this may have been my best upgrade yet. Before I was getting 210 miles per thank with 35" tires and 4.10 gears, now I'm getting 235 miles per thank with 35" tires and 4.88 gears.... SWEET............. Oh! Did I mention how much more pulling power I got from them....huge...huge difference.