M&G wrenching party in Warrenton. 12/17/11

[Pacifier]

If you would like to hang out and work on your vehicle / someone else, please feel free to join us this Saturday 12/17/11.

We can start at 0900....? :grouphug:

7481 Argyll Court
Warrenton, VA. 20187.
My number - 703dot298dot0889

[Frankpapa]

In!

[NYY_XJ]

In!


Frank is only showing up so he can steal his jack stand back...

[PA Highlander]

I might have to swing by with the little one just to say hello. :cool:

[Flexxj90]

If you would like to hang out and work on your vehicle / someone else, please feel free to join us this Saturday 12/10/11.

We can start at 0900....? :grouphug:

7481 Argyll Court
Warrenton, VA. 20187.
My number - 703dot298dot0889
damn Id come by just to see some familiar faces again, alas Ill be in Miami.
hopefully the next time.

[PA Highlander]

Might need some diagnosis help ... got a rotational vibration. I have a feeling it may be the rear driveshaft. :mad: Any idea if this lifetime powertrain warranty covers driveshafts? :confused:

[Pacifier]

I don't believe drive shafts are covered. Sounds like we may be drinking hot cocoa instead of beers on Saturday. :pound:

[Bnizzle]

I might try and swing by in the AM for a bit, might need to get out and away from the "Girls" (wifes friend in town for weekend), still ugg, need to put in my Rear Up/lw CAs and spring wedges (holding off on re welding spring perches till later..

will we have a welder there? I have some CA skids to get on :) I weld like I solder...in a big clump..lol...

[JMUJEEP]

I don't believe drive shafts are covered. Sounds like we may be drinking hot cocoa instead of beers on Saturday. :pound:

no no no... if its cold then you make some hot apple cider with spiced rum :boink:

[Scrambler84]

Might need some diagnosis help ... got a rotational vibration. I have a feeling it may be the rear driveshaft. :mad: Any idea if this lifetime powertrain warranty covers driveshafts? :confused:

Yeah sure, right up to the point you lifted it and changed the drive line angles. Then its well sorry but its a modified vehicle ect. different years had different warranties on power train too, my 2010 was 5y60k I think so depends on year for sure.

[PA Highlander]

Kind of what I expected ... Mine's an '09 so I got the Lifetime Powertrain Warranty. Figured getting a driveshaft covered wouldn't be likely. Anyways if someone can take a look/listen for me Sat to confirm my suspicions ... then i'll get to ordering Jeep parts for Christmas :sly:

[Bnizzle]

altho i have heard of kids getting DS replaced under warranty so i say give it a shot

[Pacifier]

I might try and swing by in the AM for a bit, might need to get out and away from the "Girls" (wifes friend in town for weekend), still ugg, need to put in my Rear Up/lw CAs and spring wedges (holding off on re welding spring perches till later..

will we have a welder there? I have some CA skids to get on :) I weld like I solder...in a big clump..lol...


Yes, I have a welder that you can use, it welds up to 1/4" steel on a single pass.

[Bnizzle]

have guest in town, so will have to play host for breakfast i am thinking (they are out shopping so dont know yet) should be showing up around 1030ish? if thats cool beans

[Pacifier]

I'll be here all day, so if you get a chance feel free to swing by.

[Frankpapa]

I can't stay long. Found out today my daughter is arriving a day early from Kentucky.

Note to whoever shows up first: Diego will ask for a ride to Starbucks. :croc:

[Pacifier]

My secret has been revealed.:tape2: looks like I'm going to have to get up even earlier to fuel up. :pound:

[Gonzowerke]

I can't stay long. Found out today my daughter is arriving a day early from Kentucky.

Note to whoever shows up first: Diego will ask for a ride to Starbucks. :croc:
In that case, I'll make sure I'm first...on the motorcycle!

[H2_RECOVERY]

It's actually burger king for the girls!

[Pacifier]

Instead of creating a new thread, I'm just going to edit this one. Tomorrow I plan on swapping out the dummy axle for the new HP 30. If I have enough time I may also replace the 3.55 gears for the 4.10's. Come on by if you're bored.

[Flexxj90]

What time? If Im not comatose and wake up late I may try to stop in

[Pacifier]

I was thinking to get started around 10 am.

[Flexxj90]

Ill see how it plays. Im at work til 6 am. If Im not complete trash I may try it. Are ya gonna be playing all day? If so I might leave early for work and stop by on my way in, It would be 1 ish I guess.

[Pacifier]

Ill see how it plays. Im at work til 6 am. If Im not complete trash I may try it. Are ya gonna be playing all day? If so I might leave early for work and stop by on my way in, It would be 1 ish I guess.


I have nothing better to do, so I'll be working on the MJ until I either get tired or day light starts to fade away. :madgrin::wacko:

[Bnizzle]

ugg lol screwed me all up with the edit of day...

[Scrambler84]

Ho long you all think you be at this? could stop by maybe after finishing Flag Pole with NVJA and Franks going too

[Bnizzle]

i know last weekend i didnt get out of there untill around 7 :) and thats when it started to get real (read: the WT came out)

[Bnizzle]

Ho long you all think you be at this? could stop by maybe after finishing Flag Pole with NVJA and Franks going too

breaking in the new jeep on some gnarly greens? easy on that paint job:croc:

[Pacifier]

It's definitely going to be an all day event.

[Flexxj90]

It's definitely going to be an all day event.
Saw your progress on FB, looking good. Im not gonna make it, having to come in early, and getting home late this morning got me all screwed up.