View Full Version : SYE needed?
mhauganater2315
03-31-2006, 05:52 AM
I just got coil spacers from mike the other night...i currently have a 3" lift, I'm wondering if i will need an SYE to run this setup? would it be ok to put on the spacers and then put the SYE on in a couple weeks or do i need to wait and do it all at once?
H2_RECOVERY
03-31-2006, 12:56 PM
DO have a vibration when driving since you put in the pucks? if so you might be able to shimm the crossmember down a little to eliminate it but you might want an sye
Mike
kitesurferinva
03-31-2006, 06:52 PM
DO have a vibration when driving since you put in the pucks? if so you might be able to shimm the crossmember down a little to eliminate it but you might want an sye
Mike
Mike's got it covered. Each jeep is different, and it all depends on which supsension you have in already, as well as how sagged it is. The rule of thum I have seen used and it works pretty well is anything more then 3.5in of suspension, and you'll want an SYE. This will also help you out if you get adj uppers and lowers so you can dial in your pinion angle and still have the correct length drive shaft...
But, in the end, Mikes question of , do you have vibes will answer if you need the SYE immediately or not.
mhauganater2315
03-31-2006, 11:54 PM
only have the fronts on so far so once i finish up we will see..thanks for the info guys
vBulletin® v3.8.3, Copyright ©2000-2012, Jelsoft Enterprises Ltd.