TeeJ
10-09-2008, 11:51 PM
I'll be bringing all of this, except the frame and maybe the engine, to the NovaJeepers Swap Meet and Offroad Driving Skills Day this Saturday, Oct 11, 10:00 - 4:00 at Manassas Jeep, 8100 Centreville Rd, Manassas. It's free!
I have '93 YJ parts for sale from an unfinished project I bought for the tub, which is NOT for sale. The YJ had been disassembled, but the build-up wasn't started. But the seller said everything was working OK before the tear-down for a Spring Over Axle and 350 V8 build. Body parts are in very good to excellent condition. I've tried to set reasonable prices, but I want to sell this stuff and will consider reasonable offers.
Hood & hinges, great condition - $55
Fenders, no damage, only some spots of surface rust - $35 each
Two grills, support rods, hood rods, no damage, little rust - $40 each
Frame, truly excellent, no damage, only a few spots of minor surface rust inside or outside, stock springs included - $235
Under hood and under dash harnesses in good condition, computer, headlight/parking light harness - $100
Speedo / tach assembly - SOLD
Gauges assembly - SOLD
Throttle cable, moves very freely, end pieces intact - $8
Speedo cable - GONE
Charcoal canister - free with other purchase
Tilt steering wheel and shaft, no key - $125
Plastic gas tank - $20
Stock gas tank skid - $10
Stock belly skid - $15
Stock steering linkage parts, see pic - $15 for all
Steering gear box - SOLD
Dash pads - 1 good $5, 1 with 3 cracks free
From the Spring Over Axle and Chevy 350 engine build-up plans:
Dana 44 front axle with disc brakes, 3.07 gears which look good. The knuckles are flat-tops, easy to do high-steering conversion. The SOA seems to match YJ springs well - $175
Chevy 12 bolt rear axle, drum brakes, 3.07 gears which look good. Needs one shock bracket replaced. Spring pads are each about 1" wide for YJ SOA, need to be relocated. No problem, not expensive.- $150
Chevy 350, 4 bolt main, no carb. This is from a '76 Blazer which I was told was running well when it gave up the ghost due to rust.... - $225
Both axles are 65 to 66 inches +/- wheel mounting surface to wheel mounting surface, and both are 6 bolt wheels. The front are manual hubs, one knob is chipped but works OK. I don't have pics of the axles and frame yet as they're stored elsewhere and I just haven't got to them yet.
4 roller tires (31x10.50??) and matching 15" Blazer wheels that were on the axles, GM 6 bolt, rims OK, tires are old and not for street use but 3 hold air well, 1 for 12 hours or so... - $5 each, free with axle purchase
Please ask to look / kick tires -IF- fairly seriously interested, but most of this is not at my house... you know about time and gas...Come to the Swap Meet! If you have questions, feel free to PM. Thanks for looking -
Pics: http://www.kodakgallery.com/ShareLandingSignin.jsp?Uc=arg1vs5.10cxpfc5&Uy=-q2pomi&Upost_signin=Slideshow.jsp%3Fmode%3Dfromshare&Ux=0&UV=329256815726_74612581813&localeid=en_US (http://www.kodakgallery.com/ShareLandingSignin.jsp?Uc=arg1vs5.10cxpfc5&Uy=-q2pomi&Upost_signin=Slideshow.jsp%3Fmode%3Dfromshare&Ux=0&UV=329256815726_74612581813&localeid=en_US)
I have '93 YJ parts for sale from an unfinished project I bought for the tub, which is NOT for sale. The YJ had been disassembled, but the build-up wasn't started. But the seller said everything was working OK before the tear-down for a Spring Over Axle and 350 V8 build. Body parts are in very good to excellent condition. I've tried to set reasonable prices, but I want to sell this stuff and will consider reasonable offers.
Hood & hinges, great condition - $55
Fenders, no damage, only some spots of surface rust - $35 each
Two grills, support rods, hood rods, no damage, little rust - $40 each
Frame, truly excellent, no damage, only a few spots of minor surface rust inside or outside, stock springs included - $235
Under hood and under dash harnesses in good condition, computer, headlight/parking light harness - $100
Speedo / tach assembly - SOLD
Gauges assembly - SOLD
Throttle cable, moves very freely, end pieces intact - $8
Speedo cable - GONE
Charcoal canister - free with other purchase
Tilt steering wheel and shaft, no key - $125
Plastic gas tank - $20
Stock gas tank skid - $10
Stock belly skid - $15
Stock steering linkage parts, see pic - $15 for all
Steering gear box - SOLD
Dash pads - 1 good $5, 1 with 3 cracks free
From the Spring Over Axle and Chevy 350 engine build-up plans:
Dana 44 front axle with disc brakes, 3.07 gears which look good. The knuckles are flat-tops, easy to do high-steering conversion. The SOA seems to match YJ springs well - $175
Chevy 12 bolt rear axle, drum brakes, 3.07 gears which look good. Needs one shock bracket replaced. Spring pads are each about 1" wide for YJ SOA, need to be relocated. No problem, not expensive.- $150
Chevy 350, 4 bolt main, no carb. This is from a '76 Blazer which I was told was running well when it gave up the ghost due to rust.... - $225
Both axles are 65 to 66 inches +/- wheel mounting surface to wheel mounting surface, and both are 6 bolt wheels. The front are manual hubs, one knob is chipped but works OK. I don't have pics of the axles and frame yet as they're stored elsewhere and I just haven't got to them yet.
4 roller tires (31x10.50??) and matching 15" Blazer wheels that were on the axles, GM 6 bolt, rims OK, tires are old and not for street use but 3 hold air well, 1 for 12 hours or so... - $5 each, free with axle purchase
Please ask to look / kick tires -IF- fairly seriously interested, but most of this is not at my house... you know about time and gas...Come to the Swap Meet! If you have questions, feel free to PM. Thanks for looking -
Pics: http://www.kodakgallery.com/ShareLandingSignin.jsp?Uc=arg1vs5.10cxpfc5&Uy=-q2pomi&Upost_signin=Slideshow.jsp%3Fmode%3Dfromshare&Ux=0&UV=329256815726_74612581813&localeid=en_US (http://www.kodakgallery.com/ShareLandingSignin.jsp?Uc=arg1vs5.10cxpfc5&Uy=-q2pomi&Upost_signin=Slideshow.jsp%3Fmode%3Dfromshare&Ux=0&UV=329256815726_74612581813&localeid=en_US)