Tranny bolts.

[fryed_1]

Is there a trick to getting those two bolts off at the top of the bellhousing? I wrestled with those bastards for more than 2hrs last night and couldn't get either one to budge!

[H2_RECOVERY]

there is put your torz socket on them and a long extension. Hit the end of the extension with a hammer and then try it. The shock should break it. What i normally do is hang the engine and trans down low enough to get a 1/2 impact gun and adapter to 3/8 and socket and wing it out.

[fryed_1]

Yeah I can't seem to get enough space back there to fit more than my 1/4" drive back there though, even letting the tranny drop as far as it will go. I might just put a chain on the engine, pull the radiator out and scoot it all forward as far as I can without breaking anything.

[02tj]

omg! look out!